
The Short Version
What I Like
- Shockingly amazing thumb studs and a fantastic thumb flick.
- Excellent middle-finger action from the blade cutout.
- Very, very light for its overall length.
- The detent is about as good as it can get with these opening options.
What to Consider
- Middle-finger flicking the studs needs care with index-finger placement; I would use the cutout instead.
- I do not necessarily love the carbon-fiber inlay, though it looks good.
I think the Artisan Cutlery Beest is a bit underrated. I do not think enough people are talking about it. I am a huge, huge fan of this design.
Specs
Overall length is 8.02 inches, blade length is 3.65 inches and blade thickness is 0.130 inch. Blade material is S35VN, which is different from the S90V I normally see on more premium Artisans. For my daily use, I think S35VN is just as good as S90V, maybe a little better because I think it is easier to sharpen.
The blade is a drop point with a flat grind. Handle length is 4.37 inches, mostly titanium with a little carbon-fiber inlay on each side. I like how they incorporated it. There is a frame lock and left- or right-hand tip-up carry.
They did a really, really nice job on the filler tab with hidden screws. It goes amazingly well with the honeycomb design. They could not have done that much better. Weight is a very light 2.89 ounces for a knife this long. Dustin Rhodes designed it.
Dustin also designed the Artisan Cutlery Wizard, which I still think is one of their best knives ever. It is absolutely phenomenal. I see similarities in the handle and filler tab, nice design language carried over from the Wizard.
Alongside the CIVIVI Sokoke and Spyderco Shaman, the Beest is really about the same length as the Shaman. It is a nice, pretty big knife with a more elegant, unique, kind of futuristic design. I really dig the feel of the design.
It has a really, really good-looking drop-point blade, nice and thin at around 0.017 or 0.018 inch behind the edge. I like the blade cutout carrying on the honeycomb shape from the handle. I thought that was really clever.
The thumb studs are shockingly amazing.
Full Specs
- Overall length
- 8.02 in
- Blade length
- 3.65 in
- Blade thickness
- 0.130 in
- Blade steel
- S35VN
- Blade shape
- Drop point
- Grind
- Flat
- Handle length
- 4.37 in
- Handle
- Titanium with carbon-fiber inlays
- Weight
- 2.89 oz
- Lock
- Frame lock
- Carry
- Left- or right-hand tip-up
Specifications: Manufacturer listing
Opening, lockup and design
When I saw their placement, I thought they would either be amazing or absolutely terrible. They are freaking amazing. The thumb flick is fantastic, very easy and satisfying.
Middle-finger flicking the studs takes a little getting used to because they are close up there. It is still very easy, but I have to be careful not to catch the blade with my index finger. This is not a knife where I would use the studs for a middle-finger flick. I would use the blade cutout, which gives excellent middle-finger-flicking action.
The frame lock is very nice, with that perfect kind of fifty-percent lockup I always look for, and an overtravel stop. The clip is fine, with nice stronger retention. It goes in and out of the pocket really well without any issues. It is hard to knock anything on this knife.
I am surprised I have not heard much about it, because it is that good. I was a fan from when I saw it, I believe, at one of the Blade shows, though I cannot remember whether it was Texas or Atlanta. I like the clean but modern design, the straighter lines and the honeycomb pattern.
The carbon-fiber inlay is nice and unique. I do not hate it or necessarily love it, but it looks good nonetheless. I am not sure whether I might have preferred more honeycomb milling there. It adds another medium and kind of gives it a different little aesthetic down low, which I think is kind of cool. I like that the inlay is balanced on both sides. I think that worked out really well.
In my opinion this is somewhat of a flex from Artisan, making a big knife with a lot of milling work while keeping it nice and light. The front flipper is also reach-around approved and very, very good.
The detent is about as good as it can get with so many deployment options: thumb studs, blade cutout and front flipper. With a frame lock they really have to nail the detent, with the perfect-size detent ball in the perfect place, and they did. It is really, really good from top to bottom.
The only way someone probably would not like it is if they just do not like the design. I absolutely love it.

